The production process of gift box packaging?

The production process of gift box packaging?

Printing→Surface Finishing→Outer Material Die Cutting→Grey Board Die Cutting→Grey Board Slotting→Grey Board Forming→Outside Material Pasting→Assembly→Inspection→Packing

Most of the highend gift boxes that are common in our daily life are made of paper, and the surface of paper is also the most suitable for applying more processing techniques.

Common flaws or quality control points:

【Loose edges】After the paper is pasted, the four mouth edges of the box body are not tightly adhered, and there is a phenomenon of hanging between the paper and the gray board.

【Wrinkle】Irregular folds of different lengths are formed on the surface of the paper after pasting.

【Broken corners】 After the paper is pasted, the four corners of the box are damaged and white.

【Exposed ash (exposed bottom)】 Due to the inaccuracy of the knife plate making, or the offset of the positioning during the pasting operation, the pasting paper is folded and the overlapping position is dislocated, causing the gray plate to be exposed.

【Blistering】The surface of the box is partially raised and irregular, and the size of the bubble is different.

【Glue Stains】The traces of glue left on the surface.

【Protrusions (Acne)】There are particulate matter remaining in the lower layer of the packaging material, which partially props up the surface and destroys the flatness of the surface of the box body.

【High and low angle】After the gray board is half-die-cut or slotted, the four sides are folded and formed, and the two adjacent sides are inconsistent in height.

【Water ripples】After the box body is pasted, in order to make the edges and corners adhere more tightly, it is necessary to scrape the four sides of the box body with a scraper. Due to the irregular force, the length of the entire edge will appear. , uneven strips or small bubbles, like water ripples.